Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 4070 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Red 50 - and PF Sense

Philip Nash

Hello, 

I am wondering if someone may have some good ideas here,

We are using  the RED 50 for site to site VPN on our corporate level.  But we also have to run PFSence VPN to connect to all  field equipment  that we work with. 

Today I have to use 2 internet connections to 2 networks (Well Vlans) and then 2 NIC´s of the systems that need access to both.

We don't want to put the RED first as its too limiting for us.

Is there any way to  put the RED behind a Netscape PFsence ?  Or is there any way to putting the settings for Sophos in another VPN box that would be able to handle  multi VPN connections ? 



This thread was automatically locked due to age.
Parents
  • 0

    I'm not really understanding your question very well. Is it possible to make a quick drawing of what you have now and what you want to achieve?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • 0 in reply to apijnappels

    Hello,    Sorry my explanation was not the best,    On the left is what we have today,  ( we do use Vlans in places)    On the right is what we would like to do, or put  Both VPNs on the same box, or even though each other.   but this is were i am not sure what the limitations of Sophos is. 

  • 0 in reply to Philip Nash

    I think this should be possible. In the situation you want to go to, you could define the PFSense as default gateway and create a static route in the PFSense box for the network(s) behind the RED to route that traffic to the RED.

    Does that come close to what you want to achieve?

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • 0 in reply to apijnappels

    If I put the RED between my End point  and the PF Sense,  Would that not try and direct all traffic to the corporate network first, See there is no response then   look at other routes ?   As I try  to avoid sending un nessassey traffic to Corporate   and also keep our office VPN as fast as posible as we  stream a lot of video feeds over our VPN. 

  • 0 in reply to Philip Nash

    You don't have to put the RED in between but can do it like this

    PFSense would be the default gateway and traffic intended for the networks behind RED need a static route in PFSense to send it to RED.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0 in reply to Philip Nash

    You don't have to put the RED in between but can do it like this

    PFSense would be the default gateway and traffic intended for the networks behind RED need a static route in PFSense to send it to RED.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML