Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 3 subscribers
  • Views 15040 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED 15w and UTM 9 : How configure the wifi?

Julian Cast

Hello,

 

i dont't understand the good process to configure the wifi for the RED 15 W. Actually, the system work perfectly for the LAN port, how can easily create a WIFI with exactly the same access than the LAN and manage the password of this wifi?

Here the actual parameters. 

 

Thank you!

Julian



This thread was automatically locked due to age.
Parents
  • 0

    Hi Julian,

    is the RED already connected?
    If you want to configure the wifi you had to do this under wireless protection and not in the RED section.
    Maybe you have to put under Global the RED network so that the "AP" would be recognized.

    Then you can configure the wireless as usual.

    Best Regards
    DKKDG

  • 0 in reply to DKKDG

    Hello,

     

    yes it's connected. In interface, a new hardware has appear => "wlan4 Remote Wireless Network". I create a New interface with it. Add it in Wireless Protection/ Global Settings but i don't find the wifi in Wireless Protection / Accesspoints :(

Reply
  • 0 in reply to DKKDG

    Hello,

     

    yes it's connected. In interface, a new hardware has appear => "wlan4 Remote Wireless Network". I create a New interface with it. Add it in Wireless Protection/ Global Settings but i don't find the wifi in Wireless Protection / Accesspoints :(

Children
No Data
Unfiltered HTML