Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 3609 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connecting Red to new UTM Device

David Do Van

Hello Community,

 

We are trying to connect a RED 10  to a new UTM 9.509-3 I added it with all needed information and now i get this Error:

Self: Failed to open Private Key error:0906D06C:PEM routines:PEM_read_bio:no start line error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib

 

Is there anything wrong with the configuration on the UTM?

 

Sincerely yours

 

David



This thread was automatically locked due to age.
Parents
  • +1

    I did the following Google, David, and only this thread was found:

    site:community.sophos.com/products/unified-threat-management/f "Failed to open Private Key"

    I would disable/enable RED on the 'Global Settings' tab to re-initialize RED Management.  Don't forget to backup first and to note the 'Unlock code' f the RED 10 before you do that.  Any luck with this?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • +1

    I did the following Google, David, and only this thread was found:

    site:community.sophos.com/products/unified-threat-management/f "Failed to open Private Key"

    I would disable/enable RED on the 'Global Settings' tab to re-initialize RED Management.  Don't forget to backup first and to note the 'Unlock code' f the RED 10 before you do that.  Any luck with this?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML