HI All.
Site 1 (rca) We have a SG Utm 330: 192.168.16.1
Site 2 (si) Connected to that is a red 50 in transparent/split : 192.168.0.253
the 2 sites are on the same domain and we manage their internet with their own local firewalls.
we are only sending selected traffic between the 2 sites.
I am setting up a new wifi using Ubiquity. they have existing units. i am using this to create an ssid on vlan6.
the AP's are connected on a smart switch with vlan configured. The red is plugged into this switch.
Currently my network is running normal.
What i am trying to do:
I have set up a valn on the UTM at site 1. using vlan6 and the red at site 2 as my Hardware.
I have created a dhcp server on the utm at site 1 tagged on the valn 6 network, to give ip's ate site 2 on the vlan6 wifi.
I am connected on the wifi (valn6) at site 2, but not getting dhcp or network to the utm.
No masquerading between site 1 and site 2 as site 2 uses it's own firewall.
What can be the issue?
no conectivity between the sites on valn. normal lan still running normal.
Below the configs.
This thread was automatically locked due to age.
