Good Morning, i have cluster UTM SG310 with firmware version 9.509-3 WAN IP IS: 1.2.3.4 Additional Address: 1.2.3.5 Internal LAN: 192.168.0.100 MPLS Gateway: 192.168.0.15 Web Server: 192.168.5.19 (Under MPLS) Static Routing configured on…

Good day, I am running Sophos UTM 9.5 (latest version as of now) as a virtual appliance and have purchased the WAF module. Unfortunately I can't figure out how to properly configure this so here is my use case: we use 1 domain: mydomain.tld…

Hello, It might sound like a strange request but here is the situation: I am using the UTM as a point in for several customers. One of them wants to be able to get a tcpdump in regards to the data transferred for troubleshooting purposes. I don…

The main network for the entire organization is 192.168. 168 .x That is VLAN 168 There is a management network on network 192.168. 150 .x That is VLAN 150 Members of the IT Group have workstations on the 168 network (as do all other computers…

I've been doing some network refreshing over the past week. Today I spun up a new DHCP server pointing to new DNS servers. The setup is pretty straightforward - we have two VLANs phones and data. The new DHCP and DNS Servers worked fine on the Data…

Hey guys back again with my newbie issues. So I have the UTM up and running without issues and every device in the entire house is connected either wired through a switch or wireless over an AP and happily running traffic through the UTM. All except one…

Hello, I've scoured through all the sophos, reddit and internet forums I can, but I'm at my wits end here. Equipment: SG-125 (Latest Patches) Internet Service: 1Gbps down, 50 mbps up (approximately) Public IP Address Available: 5 total, 3 are available…

Anyone know if it's possible to play a Play Anywhere game behind a Sophos UTM? I'm getting server connectivity blocked. I've gone through the teredo troubleshooting/uninstalling steps and have created a NAT rule as well as IPS exception and Web filtering…

Hello, I have a couple of questions regarding configuring HA on UTM SG105: 1) Is it necessary that we connect the master and slave with a dedicated Ethernet cable on the HA port? Or can we connect them thorough a switch (in case we need to place the…

Hey Everyone, I'm trying to setup a static route to another network in the same location. I'm not looking for LAN 1 to use LAN 2 as a gateway (or vice versa) Essentially this is the setup. Lan 1 (FiOS with Netgear X10) 192.168.1.x Lan…

OK, here is my dilemma. I have my AD setup the way I want. When I do Lite Touch, and Zero Touch deployments with my MDT servers, the tasks place the computers in specific OUs based on the role the computer deployed is going to do. I have GPOs that apply…

Hello everyone I’m here looking for some enlightment, as this is driving me nuts Here’s the scenario: Location A - Sophos utm v9.506 – LAN 1.1.2.0/24 Location B - Sophos utm v9.501 – LAN 1.1.3.0/24 Location C - RED15 connected to location…

Just evaluating UTM 9 (as VM) and I am unable to find a way how to rate limit (in pps) a particular IP. Examples: - rate limit LAN client 10.10.10.10 to 100 UDP packets per second. - rate limit WAN client 1.2.3.4 to 100 established connections per second…

I THOUGHT this would be simple enough - enable authentication in the UTM SOCKS options, add some users / groups, press apply. At least, that's what I did. Alas, it's not working. Trying to get the good ol' Skype running using SOCKS. It works OK without…

This may be a little tough to answer, but a question.... So I have as Rule #1 in my firewall to DROP all connections Incoming/Outgoing if it is in an ip address range/network/etc. as a first line of defense. I then receive notifications about a portscan…

lHello Everyone, Before I begin, I've spent the better part of 2 days attempting to find my solution. I didn't want to reach out to the community beforehand. Here's my situation, setup, and problem. Situation: I'm getting away from the Sonicwall…

Hello everyone, We have had this issue for quite some time and support was unable to give us answers after spending days troubleshooting and reviewing logs live. Hoping that someone from the community has seen this before and can help. About 25 users…

Hi all, I have a problem connecting the Windows RD Client (mstsc.exe) to a remote desktop gateway behind port 443. Remote server Sophos UTM 9.5 (NAT forwarding port 443 to TSGW) TSHOST01 TSHOST02 TSGW+BROKER Client 1 Draytek Router…

Hi I am running UTM 9.506 and unable to figure why i cannot access some of the internal (sophos webadmin, user portal, webui for other devices), do not see any drops on the firewall logs. Everything works flawlessly on my android. Also tried the same…

Hi all: I have implemented a Mikrotik RB2011 series router/firewall that works great with the exception that I have realized the Mikrotik firewall is very lacking compared to the UTM firewall that was on the old Fortinet router/firewall. I'm thinking…

I have a UTM 9 FW 9.5 I have Remote Users log in through VPN Client (VPN-SSL) The VPN Pool is 10.242.2.0/24 the internal network is 192.168.4.X/24 I have a PC in my internal network that is configured for file sharing. (windows 7 Machine) Users…

I have seen some old posts regarding AFCd, but not one where it appears the source is on LAN. This is new. On about 2017-11-16 I started seeing this, where 192.168.25.52 is the LAN Domain Controller. It looks to me like AFCd, whatever it is, is…

hello, i'm working on a Sophos SG 105 (in my office), on eth 0 i have internal lan (192.168.1.X), in lan i have a server with DHCP, well.. At my office i have a Wireless Bridge to my house but i in my house i have a router with DHCP... I just delete…

Hello, first off, I was reading different threads about this, but couldn't find an answer for my case, hence this post. I have Sophos UTM 9 attached to a Layer 2 switch and the to some Virtual machines. There is a LAGP enabled in the sophos…

Hi All, We are having an issue with IPSec tunnel going down on two site after a few days. If we just plug another device to the switch then Tunnel comes back online. we have switch connecting through 4G modems connected back to our Sophos firewall…