Hello, i use Sophos UTM Home since years now, and im really happy with it:) But as the Sophos UTM is still missing the Open VPN Client possibility, and DNSCrypt DOH is also not possible, i was thinking to add an other FW as Fronted Firewall to configure…

Hi, I have 2 AP55c access points in my house. I have noticed for quite some time the performance is really poor, and have looked into this problem so many times, but have never found a solution, hence im going to try to ask here. I have found out…

Hi to all, I use standard device who is doing NAT, if i replace this device by Sophos UTM, does i still have NAT function if i replace it with Sophos UTM Home Ed. ? Does Sophos UTM integrate NAT function and Firewall ? Does it is mandatory to keep…

Hi, I have followed the following steps so far: created static mappings for all the devices in my house: computers, tablets, phones, raspberry pi, IOTs like Google Home, smart tv, smart dvd player, smart irrigation system, thermostat, etc. Created…

Hi, I would like to setup Google SMTP with my gmail id and password but it is not sending emails. Here is my setup: I created DNS Host with the host name of smtp.google.com Now in Management--> Notification --> Advanced, I created the following…

Hello, I have a VPN Router in a DMZ, what is routing all my Internet Traffic to a VPN Service. I was wondering to protect the Router in the DMZ, if it would make sense activate Web Application Firewall for this Router ? I know that this settings…

Hello, I have a strange occurrence. I have activated Intrusion Prevention and I had also the Web protection which for now I have turned off. I have forced every device in my house to go through the UTM9. Even though everything is a bit slower, it…

My work has disabled Remote desktop connection for port 3389, but allowing port 443. How can the UTM differentiate between web traffic to my domain xxxxxx.com and remote connection on the same port? I have tried to create a virtual web server with i.e…

I've been working on this for a while now and don't know where else to look. I have recently set up the Sophos Home UTM and everything has been working well, except that a few websites I use now come back immediately with a 'connection reset' message…

Hi, So I have kind of fixed the slow ssl/openvpn issue, but I can't seem to find a way to put the exception in. - Part 1 of the fix was to disable the UDP flood protection - get 1.5-2mbit (otherwise caps out ~0.5mbit) - Part 2 disable IPS get full…

I am trying to add rules into the custom.rules file and added the inclusion for the custom.rule file to snort.conf include $RULE_PATH/astaro.rules include $RULE_PATH/custom.rules however any modifications to chrooted files revert back upon restart of…

I'm just setting Sophos up and haven't had too much trouble that wasn't caused by some small issue, so I'm guessing this is the same. I've went through and set up the NAT Rules , but it's still not working. The domain name can be accessed outside of the…

Hey all I just finished up setting up the UTM 9 Home edition and I currently have it up and running with eth0 as the WAN and eth1 as the LAN. However, my motherboard has a total of 8 Ethernet ports (though 2 are being used for WAN and LAN out of the 8…

I am running a setup with a bridged FioS modem giving me a single public IP, ESX host with internal/external vSwitches, and the Sophos UTM. I am currently running a wifi router through the UTM with all of my rules in place and it is working great. I would…

Hey all, New UTM Home user. Most things are working as expected. IM programs will not login however. Am I correct in assuming that if I create a firewall rule that is ANY-ANY-ANY that I have bypassed the firewall for testing purposes? Even with this…