• Publishing internal server(web,SSH) internet behind RED50 Standar/Split

    Hello I want to know if it is possible to publish 3 ports (8000,3000,3001) of a server connected to a RED50 in standard/split mode. Currently it is working configuring the RED50 in standard/unified mode, but as all the traffic goes through the UTM Firewall…

  • load balancing

    We are adding 2 WAN connections next week I have reviewed as much documentation as I can but I cannot determine the best and correct configuration to achieve this. both new WAN lines are working 1st mainline microwave and the 2nd fiber we want to creat…

  • load balancing

    We are adding 2 WAN connections next week I have reviewed as much documentation as I can but I cannot determine the best and correct configuration to achieve this. both new WAN lines are working 1st mainline microwave and the 2nd fiber we want to creat…

  • RED devices per UTM model

    How many RED devices can be connected to each UTM model (in HA configuration) ?

  • Port Forwarding to another UTM connected via RED

    Hi, I'm using the UTM for many years now, but now I have a problem I got stuck.. The Environment: Site A (a rented Server): Small Server, virtual UTM (UTM A), many public IPs, fast Internetconnection Site B: big hardware UTM (UTM B)…

  • VOIP phones on RED 50 dropping dial tone to UTM 9.5

    Having a pretty persistent issue that's been driving me nuts. We run UTM 9.5 at the main site and have a RED 50 device at a remote site (Standard/Unified). Starting last week, we've been randomly losing the dial tone on phones. Checking the firewall…

  • Connection to backend failed. Press Shift+Reload to try again.

    Hello, On trying to log onto the webadmin of UTM 9, we get a popup saying "Connection to backend failed. Click Shift+Reload to try again." after which we are logged out. This issue is a new one and we are not able to resolve it. Does anyone have any…

  • Block Internet Access of a Host on RED Network

    Hello, We have about 22 IP CCTV cameras that need to be blocked for internet access. Only the DVR (with which the cameras are attached) will be needing the internet access. The cameras are connected to a RED working in split mode. The IPs of the cameras…

  • MAC Filtering on Internal Network

    Hello, We currently have a SG210 UTM deployed with 3 REDs within our network. We have a set of MAC addresses defined for each of the networks (i.e. Internal + 3 RED networks). We are able to manage who effectively has access to our network easily…

  • Port Forwarding on RED

    Hello, We have three devices in our network. ADSL Router: WAN IP - 185.168.41.75 (static) LAN IP - 192.168.1.1 RED10: WAN IP - 192.168.1.2 LAN IP - 50.50.50.1 CCTV DVR: Port - 91 LAN IP - 50.50.50.233 We would like to…

  • Dropped packages and Firewall violations even though Allow All rule

    Hey everyone, we have an SG 105 on the main branch, network is 192.168.42.x and a RED 15 on a subsidiary branch which is 192.168.9.x The RED serves fine DHCP on 192.168.9.128 until 254. Being on the remote subsidiary, I am able to for example ping…
Unfiltered HTML