• Trouble with masquerading

    I have a UTM 9.5 in the cloud. I connect to it with a L2TP over IPsec connection. I establish the connetion and visit some site to check my IP and it shows the IP of my UTM. If I drop the L2TP over IPsec connection and refresh it shows my work IP. So…

  • 2 machines sharing one WAN port and IP unintentionlly

    I have a physical machine (PM) with physical ports eth0 and eth1. It is running a virtual machine VM0 via KVM. As consequence, eth0 appears aliased to virbr0, such that the only ports that are "up" are eth1 and virbr0. Other VM's lay behind VM0, which…

  • DMZ, VPN Client, Routing, FW

    DMZ, VPN Client, Routing, FW Hello, I would like to setup a router (VPN Client) in a DMZ and route traffic from LAN over DMZ to Open VPN Tunnel. I have the following configuration till now: WAN Interface (Ethernet) : 82.x.x.x LAN: 192…

  • Router behind Sophos UTM

    Hi, I have clients behind a router behind a sophos UTM which I am trying to get internet access but not sure where to go from here. My setup is below: Sophos UTM Connected to Modem (which connects to internet) LAN IP address of 192.168.1.1/30…

  • Branch Office connected via MPLS, can't get to internet.

    I Just hooked up a branch office up via MPLS and I am a bit stumped I have a Laptop plugged in on the Branch office MPLS router, it sees my main office, and vice-versa, but I can't get to the internet from the branch. I added a static Gateway…
Unfiltered HTML