Since the installation of u2d-aptp-9.36793 on 2020:09:09 our ATP module is showing almost daily attacks but from external IPs only. ATP should only show internal IPs. The destination IP in all cases was a DNS Server of ours in the DMZ. 2020:09:09…

Hey there, we used a mail server behind the sophos with a specific domain. The domain pointed to one of our Interfaces. We used a DNAT-Rule to redirect all mail specific traffic on this interface to the mail server. It worked fine. Now i needed to…

I am new to this and just finding my way around setting up utm/firewalls i have a 2 firewall setup an internal sophos utm 9 ffirewall and an external firewall The internal firewall sophos utm 9 is setup where all computers and mobile devices are behind…

I added a second NIC to my UTM (192.168.3.*). The idea was to add an extra AP to isolate guest-clients from my local network(192.168.1.*). Everything seems to work fine. I get an IP from the DHCP service and I can access the internet from my guest LAN…

I'm just setting Sophos up and haven't had too much trouble that wasn't caused by some small issue, so I'm guessing this is the same. I've went through and set up the NAT Rules , but it's still not working. The domain name can be accessed outside of the…

UTM 9.3 Software version Onboard NIC - WAN Dual NIC Card - Internal Networks. I have just set up and activated the second internal network. I want to keep the two segmented and understood this was by default. However, when I tracert a device on network…

Hi Have been trying to get some of our DMZ servers to work with the UTM for services etc WEB proxy NTP with no luck UTM has .. Internal interface External Interface DMZ interface and all sit behind a Juniper DMZ hosts have access to Internal…