• mysql server port 3306

    I m facing in issue to accessing my sql server database on port 3306 by app sql front . I created rule in firewall from internal lan to my dmz server for mysql port 3306 . Rule Source -Lan Device -my System Ip Destination -DMZ Device - My Sql…

  • External and internal NAT for different ports

    Hello guys, I am trying to create a DNAT rule for a server based in a DMZ network. We have a wifi controller in the DMZ where Access Points from different onsite and offsite locations connect to through two different ports over WAN. I managed that…

  • DMZ Only Works When Allowed to/from Any

    Hi, We're having phone issues and the phone-co suggested putting one on a DMZ just to make sure it's not an issue with our UTM blocking something (I'm 99.99% sure it isn't .. nothing being blocked from our phone LAN in the logs, but I need to humor…

  • Do I need a Dmz

    Hi We have a Utm and at the moment we do not have or need a Dmz We have just bought a pulse secure appliance that has two network ports internal and external. I’m trying to decide the best way to set it up. If I create a new interface with a new…

  • Sophos UTM Webfilter

    Hello, I have yet the configuration, that all my Internet Traffic is routed through VPN Router in DMZ. I have the following configuration: Interfaces LAN (Internal Network): 192.168.0.0 /24 DMZ (VPN Service) : 10.0.0..0 /8 WAN: 84.x.x.x …

  • Routing all traffic from LAN to Internet over VPN Tunnel in DMZ

    Sophos UTM Configuration Interfaces External (WAN) 82.x.x.x DMZ 10.0.0.1 /8 Internal (LAN) 192.168.0.1 /24 Network Services - DNS - Global - Allowed Networks DMZ Network LAN Network Forwarders - DNS Forwarders Google DNS…

  • DMZ, VPN Client, Routing, FW

    DMZ, VPN Client, Routing, FW Hello, I would like to setup a router (VPN Client) in a DMZ and route traffic from LAN over DMZ to Open VPN Tunnel. I have the following configuration till now: WAN Interface (Ethernet) : 82.x.x.x LAN: 192…

  • Odd DMZ behavior?

    I setup a DMZ on a separate physical interface on a SG330; however, I can still ping hosts on all our internal networks. The only way for me to get this to stop is to disable both "Global ICMP Settings" and "Traceroute Settings" under the Network Protection…

  • Additional Interface not pingable when it says up in WebGUI (DNAT)

    Hello, I've recently come across a problem that in my eyes makes no sense, I have been trying to get DNAT to work with a new DMZ server. We have an additional server in the DMZ already, fully functioning. I've tried copying every single rule and configuration…

  • RE: How can I view all traffic related to a specific device?

    Hi, sachingurung, Thank you for your response! I do have a couple of internal servers that I can successfully access from the outside. As mentioned, I have a few DNATs already set up. What I'm trying to do is connect to my corporate network through…

  • Creating a DMZ

    Hey Guys I have done the following to create a DMZ for a network that I administer. The method of setting it up like this, is keeping the following in mind: # Internal and External networks being able to access the DMZ via special ports # Hosts…

  • Does the UTM work with Microsoft ADFS for Microsoft O365 business?

    I recently setup the ADFS for Office 365 business and trying to locate some help or setup guide. Could anyone please assist? I thought creating the DNAT rule was working then found I left port 443 open. I checked the forum and did change the WebAdmin…

  • Sophos UTM 9 double NAT

    I am new to this and just finding my way around setting up utm/firewalls i have a 2 firewall setup an internal sophos utm 9 ffirewall and an external firewall The internal firewall sophos utm 9 is setup where all computers and mobile devices are behind…

  • Routing configuration for DMZ Help !

    Hi, i'm a noob with UTM ASG 220 at this time. I have to configure a DMZ with a dedicated ADSl link and i'm not able to do that... My ISP gave me a /30 pool adresses for my router and told me that the UTM should to do NAT rules: 122.255.175.210/30…

  • Creating DMZ with VLANs

    Hi all, I have a SG330 and I want to setup a DMZ, to put my edge transport Exchange server in. The Exchange server will be a virtual machine, hosted on a Hyper-V 2012 R2 core host, that currently resides on the internal network. My question is, whats…

  • Allow access to network device from internal LAN and guest network

    I have a network device on our main internal LAN with static IP address; that device is connected to projector and allows users to show their screen wirelessly. I need to allow guest users to have access to that device as well; guest users are conencted…

  • DMZ, Loadbalancing & Exchange 2013

    Hi everyone, I am a little bit puzzled by the current problems I am seeing on my clients. We are running Exchange 2013 and a Citrix NetScaler as Loadbalancer. Last week we created a DMZ network using the UTM and moved the NetScaler into the DMZ…

  • Setting up a Guest Access Point in UTM

    I am running a setup with a bridged FioS modem giving me a single public IP, ESX host with internal/external vSwitches, and the Sophos UTM. I am currently running a wifi router through the UTM with all of my rules in place and it is working great. I would…

  • DMZ to Internal

    Hi Have been trying to get some of our DMZ servers to work with the UTM for services etc WEB proxy NTP with no luck UTM has .. Internal interface External Interface DMZ interface and all sit behind a Juniper DMZ hosts have access to Internal…
Unfiltered HTML