We are adding 2 WAN connections next week I have reviewed as much documentation as I can but I cannot determine the best and correct configuration to achieve this. both new WAN lines are working 1st mainline microwave and the 2nd fiber we want to creat…

We are adding 2 WAN connections next week I have reviewed as much documentation as I can but I cannot determine the best and correct configuration to achieve this. both new WAN lines are working 1st mainline microwave and the 2nd fiber we want to creat…

Hi, I would like to setup Google SMTP with my gmail id and password but it is not sending emails. Here is my setup: I created DNS Host with the host name of smtp.google.com Now in Management--> Notification --> Advanced, I created the following…

Hi, sorry, newbie question alert. Set-up UTM 9.502-4 running on "small" PC brick with 3 NICs (Eth0 is hardwired, Eth1 and 2 are USB <> Ethernet dongles) Eth0 (Management NIC) has 192.168.10.250 Eth1 (ISP interface) Eth2 (LAN interface) has…

Hi, I'm using UTM 9 in VMware and recently setup IPSec VPN to connect to our Pronto Cloud. The connection works fine until i restarted the UTM then i get this error log below. Luckily I can restore from snapshot and it works fine. Can anyone suggest…

I am new to this and just finding my way around setting up utm/firewalls i have a 2 firewall setup an internal sophos utm 9 ffirewall and an external firewall The internal firewall sophos utm 9 is setup where all computers and mobile devices are behind…

Hi Everyone, We seem to have an issue with our sophos dropping packets without giving any logs as to why. Below is what I sent to sophos when logged the call but hoping someone here might of seen it before for a speedier resolution as they have had…

I am trying to play a game that requires access to port 10001 and I have set up a rule that allow any computer on my internal network to access this port to any IPv4 address, however it is continually blocked. Firewall log is: 2016:03:01-11:38:32 oscar…

Hallo Community, Ich kenne mich leider mit dem Thema Sophos Firewall wenig aus. Beispieldarstellung: Ich habe 2 Interfaces (eth2 und eth4 an den vorderen Anschlüssen angeschlossen), welche in der Firewall auch angelegt sind (Interfaces & Routing…

I have published several RDP targets through my UTMs over the years, but this particular one seems to have me stumped. So, here is my layout. Internet -->Router (Subnet 1)-->UTM--(Subnet 2) Subnet 1 houses all of my General use items (WiFi TVs, Game…

Hello experts, following configuration: UTM with 1 LAN-Interface and 2 WAN-Interfaces (1 x ADSL 50 MBit/s = default GW (Interface A), 1 x ADSL 16 MBit/s with static IP (Interface B)). I want to publish the Exchangeserver over the second WAN-Interface…

Hi All, I've been happily using Chromecast for a while and decided to buy the latest version for another TV. Unfortunately, although the ''old' chromecast works perfectly, I cannot get the chromecast 2 to work. I can connect to the chromecast 2…

I posted this to the Astaro forum, and it has been a work in progress, but I am still having this issue. Only 2 firewall rules are active. Whenever I stream from the pc, the Xbox One game throws a network error and disconnects me from the internet gaming…