This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

3CX external clients trying to connect 3CX hosted in Cloud

Hi,


We've got a 3CX Server hosted in the cloud. On our internal network we have a 3CX SBC setup on a Raspberry Pi and we are using 3cx client on Windows laptops. We also have two older phones that cannot use the 3CX SBC, so they have to connect directly to the 3CX Server.
Everything works perfectly, but now we are in the process of installing a Sophos UTM-9 Firewall. I've tried a few configurations, but no luck.


I've configured a Network Definition for our 3CX Cloud Server Public IP and hostname.


I've also configured Service Definitions for in a group called 3CX_Group. TCP 5000, 5001, 5015, 5061. UDP & TCP 5060, 5090. UDP 9000 - 9500 and 48000 - 65535.


I then created a firewall rule to allow service 3CX Group from internal network to our 3CX Server.


If I look at the log files it shows the rule being applied and access was given, but nothing works.
SBC log


3CX Winows client


3CX Server login


I see that the port being sent from the client side is totally different. Any advice would be appreciated, thanks.



This thread was automatically locked due to age.
Parents Reply
  • You have to allow host to be reached stun.3cx.com or stun1.3cx.com (i dont remember exactly), for "Nat Traversal". Google about it

    The problem they dont register maybe the sip lines are not configured for outside use. This is in sip server configuration

    I used 3cx server inside with inernal and external phones about 4 years ago

Children
No Data