This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

sophos nat to synology help

Hello all
Hope this in the right place
What I have is a Synology nas box behind a Sophos Home install
I am new to Sophos coming from pfsense
I have internet access working
I use this NAS for various web access apps and SMTP mail server.

1 Definitions & Users>Service Definitions>made a group of ports to forward
2 Went to Network Protection>NAT>New NAT Rule to forward this group of ports to my NAS box at 192.168.1.4 I have searched the internet and youtube for 2 weeks and no go 

Is there a simple guide on how to setup NAT that actually works?
I have tried so many combinations and so far nothing works email sits in UTM que forever, firewall log says everything is being blocked. I wish sophos nat worked like pfsense


This thread was automatically locked due to age.
  • OH 
    one more thing, should I check Automatic Firewall rule for DNAT or does DNAT override firewall rules
    Thanks


    You need both a DNAT to forward the traffic and a Firewall rule to allow the traffic. Checking Automatic firewall rule while creating the DNAT is a quicker option then having to go and create a manual Firewall rule.
  • DNAT:

    Traffic from: Any
    using service: 5000,5001
    Going to: WAN interface

    Change destination to: Private IP of Synology
    Services: (you specify)

    I once did a similar configuration as yours to allow remote access to my Synology NAS from home. Please let me know if it works.
  • NAT:

    DNAT
    Verkehrskennzeichner:
    Any → "Synology2211rp+" → YOUR INTERNET (Address)
    Zielübersetzung: Server Synology 2211rp+
    Automatische Firewallregel:  none (set it manually)
    Die Initialisierungspakete werden protokolliert: yes

    Services  "Synology 2211rp+" include:

    Cloud: 6690 TCP
    FTP: 21 TCP (if used)
    HTTPS: 7001 TCP (webinterface)
    HTTPS: 5001 TCP (admin interface)
    webdav: 5006 TCP