This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configuration Problems

I've read almost all of the posts but still can't figure out 1 problem.  I'm probably brain dead on this one.  My version is 1.811.  Here's my config.
   ---------------------------
   |T-1 CSU(111.222.160.254) |
   ---------------------------
                |
   ---------------------------
   | INT card(192.168.0.200) |
   |         FIREWALL        |
   |EXT card(111.222.160.253)|
   ---------------------------
                |
----------------------------------
|Private Network(192.168.0.1-.199|
----------------------------------

I have a Exchange 5.5 server at 192.168.0.1.  I can't put this server in a DMZ because it has other apps on it.  I can't get the firewall to pass SMTP on to 192.168.0.1.  I am also looking at a https connection to this same server for database apps.  Is is possible to pass the https to this server also.  Am I defeating the security by doing this?

Thanks in advance.

Guy

This thread was automatically locked due to age.