This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to disable UDP Flood Scan for VPN traffic?

Hi,

clients in our network will need to use OpenVPN and/or WireGuard clients to connect to the outside world. Unfortunately this traffic is regarded as UDP flood and bandwith from VPN clients drop to to 2Mbps. I found in UTM  settings that it is possible to define exceptions. I did so for outgoing traffic. Just added destination ports and protocol and source networks, but this only covers half of the problem, because incoming traffic is still considered as udp flood. Any ideas how to except incoming traffic only for UDP VPN? I don't want to completely disable udp flood detection.

cheers



This thread was automatically locked due to age.
Parents Reply Children