This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to configure multiple interfaces as LAN ethernet bridge (switch)

Hi I'm new here. An IT sales person, with only interest instead of knowledge :)

I have installed sophos home on a sg135 oem appliance. Now I have defined the wan/lan interface on eht0 and eth1. Because the sg135 has multiple ports, I want to use the other interfaces as an ethernet switch.

The first searches on this forum pointed me to link aggregation under the interface settings.

With this I did the following:
1. Link Aggregation Group created
2. Changed LAN interface (eth0) from Ethernet to Ethernet bridge and set the selected NICs to both the Ethernet and LAG.

After that, I have internet access on all of the selected interfaces within the LAG, just no access to other LAN devices. For this I created a firewall rule Internal LAN > Any > Internal LAN. Also without any good result.

Does anyone have a link to a topic, or a short explanation how I can achieve this?

Thank you very much for your help in advance!



This thread was automatically locked due to age.
Parents Reply Children
No Data