i have an utm 9 with 5 vlan and two tunnel ipsec.
From standard network on utm i can reach the remote lan.
from vlan no.
Into ipsec connection on the two sides i have put standard network and vlan and i set up firewall rule for vlan -> remote lan.
Do you learn anything from doing #1 in Rulz (last updated 2021-02-16)?
Cheers - Bob
Hi Danilo Boffoli,
Thank you for reaching out to the Community!
After adding the VLANs in local networks, did the SA builds up for these VLANs?
If yes, when trying to access the remote network, run a packet capture and espdump to ensure that traffic from these VLANs is routed through the IPsec tunnel. If you see the traffic being forwarded from the UTM and no response from the remote network, it might be an issue at the remote firewall.
Try to run a packet capture and espdump on the destination IP address.
Check out the following Community thread for more informaion on how to run espcump on Sophos UTM: