Monitor harddisk sophos UMT 9 by PRTG

Hi,

Tam Le said:

 

i cant monitor CPU, RAM,.. but it not have monitor hard disk

 

So you can NOT monitor anything ?

Tam Le said:

i cant monitor CPU, RAM

Cheers,

Chris

Hi Chris,

Thanks your reply,

Sorry my typing error, i can monitor CPU, RAM,.. but i can not monitor harddisk

Tks!

Have you tried a plain old linux mib etc?

Have you tried a plain old linux mib etc?

Hi Louis-M,

You can introduce me about it?

I've been tried down MIB file from my sophos and import to PRTG but nothing was created.

I've been tried change snmpd.conf of sophos to collect disk info but not success. Can my change is not correct.

Show me true way to do this!

Tks!

It's been years since I looked at PTRG. I purely use Zabbix now. There should be something in PTRG for monitoring linux servers. Just point that at the UTM and see what comes back.

In Zabbix, there's a linux template that you just apply and voila....

You could do a snmp walk but it gets a little complex as you might have to manipulate the values returned eg bytes to gigabytes etc

Try and look for a linux template or something that you can import to PTRG.

Hi,

I've been tried import template but infomation about harddisk can not collect :V

i'm not sure whether Sophos provides data about hard disks at all by SNMP, and it's problem

Oke thanks Louis-M

Hi,

have you tried snmpwalk on that box?

You should get info at OID: .1.3.6.1.4.1.2021.9.1

from http://www.debianadmin.com/linux-snmp-oids-for-cpumemory-and-disk-statistics.html :

Disk Statistics

The snmpd.conf needs to be edited. Add the following (assuming a machine with a single ‘/' partition):

disk / 100000 (or)

includeAllDisks 10% for all partitions and disks

The OIDs are as follows

Path where the disk is mounted: .1.3.6.1.4.1.2021.9.1.2.1
Path of the device for the partition: .1.3.6.1.4.1.2021.9.1.3.1
Total size of the disk/partion (kBytes): .1.3.6.1.4.1.2021.9.1.6.1
Available space on the disk: .1.3.6.1.4.1.2021.9.1.7.1
Used space on the disk: .1.3.6.1.4.1.2021.9.1.8.1
Percentage of space used on disk: .1.3.6.1.4.1.2021.9.1.9.1
Percentage of inodes used on disk: .1.3.6.1.4.1.2021.9.1.10.1

 

Cheers

Chris

Thanks for your help, Chris

I've tried config file snmpd.config, but it not work, this config work on other linux i tried.

Thank You!

Hi,

Tam Le said:

Thanks for your help, Chris

Tam Le said:

I've tried config file snmpd.config, but it not work

What do you mean by this?

did you #snmpwalk on the prtg box to sophos utm ?

Pls post the output of your snmpwalk.

Cheers,

Chris

Hi Chris,

This is my config on snmpd.conf in /var/chroot-snmp/etc 

Because Sophos not have snmpwalk i try by tool of PRTG, and it not collect data reverse

i sure tool work because i check:

RAM Total RAM used: .1.3.6.1.4.1.2021.4.6.0

have value reverse 

i think this is problem of snmp Sophos.

Thank Chris!

Hi,

just found out that sophos utilizes the following OIDs

from www.oidview.com/.../HOST-RESOURCES-MIB.html

hrDiskStorageTable	1.3.6.1.2.1.25.3.6
hrDiskStorageEntry	1.3.6.1.2.1.25.3.6.1
hrDiskStorageAccess	1.3.6.1.2.1.25.3.6.1.1
hrDiskStorageMedia	1.3.6.1.2.1.25.3.6.1.2
hrDiskStorageRemoveble	1.3.6.1.2.1.25.3.6.1.3
hrDiskStorageCapacity	1.3.6.1.2.1.25.3.6.1.4
hrPartitionTable	1.3.6.1.2.1.25.3.7
hrPartitionEntry	1.3.6.1.2.1.25.3.7.1
hrPartitionIndex	1.3.6.1.2.1.25.3.7.1.1
hrPartitionLabel	1.3.6.1.2.1.25.3.7.1.2
hrPartitionID	1.3.6.1.2.1.25.3.7.1.3
hrPartitionSize	1.3.6.1.2.1.25.3.7.1.4
hrPartitionFSIndex	1.3.6.1.2.1.25.3.7.1.5

Found this in a forum post ... hth ...

Cheers,

Chris

Hi Chris,

OIDs follow link http://www.oidview.com/mibs/0/HOST-RESOURCES-MIB.html not work

I think MIB file of Sophos not support for disk

This problem from 2012 https://ideas.sophos.com/forums/17359-sg-utm/suggestions/3479804-more-mibs-oids

community.sophos.com/.../network-snmp-oids

Thanks Chris

Hi,

as the admin user says: declined - default oids work ...

AdminAlan Toews (Sr. Product Manager, Sophos Features & Ideas Laboratory) responded Aug 27, 2015

Sophos UTM uses standard namespaces for these basic options, so no additional MIBs are necessary.

Have to check it myself ... will respond after i did.

Cheers,

Chris