This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLANs on the firewall

Hi all,

 

so im new to managing hardware vlans and was wondering how or why id configure VLANs on my SG210 as well as my l3 switches. can anyone advise?

Do i need to match the vlans that i have on my switch on the firewall?



This thread was automatically locked due to age.
Parents
  • Hi, Yahyaa, and welcome to the UTM Community!

    We have no idea of the complexity of your topology, so we have to guess at what you want to do.  If you want the UTM to switch all of the traffic, yes, you will need the same VLANs defined on UTM.  There you will only need firewall rules allowing desired traffic.  Two things to be aware of with WebAdmin:

    WebAdmin automatically creates routes between the subnets and IPs defined on Interfaces of the UTM.
    The UTM is a stateful firewall, so you only need rules allowing requests to flow, response packets are automatically accepted.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi, Yahyaa, and welcome to the UTM Community!

    We have no idea of the complexity of your topology, so we have to guess at what you want to do.  If you want the UTM to switch all of the traffic, yes, you will need the same VLANs defined on UTM.  There you will only need firewall rules allowing desired traffic.  Two things to be aware of with WebAdmin:

    WebAdmin automatically creates routes between the subnets and IPs defined on Interfaces of the UTM.
    The UTM is a stateful firewall, so you only need rules allowing requests to flow, response packets are automatically accepted.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data