Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 5 subscribers
  • Views 13567 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to set up DHCP option 43 in Sophos UTM.

AlaaAlshaikh

We use Mitel 3300 IP Phone and we required either DHCP option 43 or 125 to make the IP Phone work on the network.

so that How to set up DHCP option 43 in Sophos UTM.
BR
Ala'a



This thread was automatically locked due to age.
Parents
  • 0

    Have a look at Network Services -> DHCP -> Options...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0

    Have a look at Network Services -> DHCP -> Options...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
  • 0 in reply to scorpionking

    Hi scorpionking

    Many thanks for your responce.

    I need to know how to steup the HEX value

    000:00:04:03:40:69:64:3A:69:70:70:68:6F:6E:65:2E:6D:69:74:65:6C:2E:63:6F:6D:3B:73:77:5F:74:66:74:70:3D:31:39:32:2E:31:36:38:2E:31:2E:32:35:3B:63:61:6C:6C:5F:73:72:76:3D:31:39:32:2E:31:36:38:2E:31:2E:32:35:3B

    cAs the above its' not working when I enter

    BR

    Ala'a

  • 0 in reply to AlaaAlshaikh

    Are you sure that your HEX value is correct? The three 0's at the beginning don't look right...

    Waht did you choose for "Scope" in your DHCP option? Global or server?

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0 in reply to scorpionking

    Hi

    I use mitel DHCP helper to creat the value

    and for scope I use global

    BR

  • 0 in reply to AlaaAlshaikh

    I would try taking the ASCII value from the mitel helper and convert that to hex with an online ASCII to hex tool. That hex doesn't decode correctly to an ascii value.

Unfiltered HTML