Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 4 subscribers
  • Views 16949 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Determining which IP address on my network is causing bandwidth spikes?

AChu87

On a UTM 625, firmware 9.355.

I have a portal from Comcast that allows me to see bandwidth usage. I saw yesterday that something was causing my bandwidth to spike to its maximum cap for about 10 minutes. 

Can the UTM show me what IP address is potentially using all the bandwidth so I can pin point the culprit?

Alex



This thread was automatically locked due to age.
Parents
  • 0

    Hi, Alex, and welcome to the UTM Community!

    On the Dashboard, click on one of the boxes beside the External interface and you will see the flow monitor.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi, Alex, and welcome to the UTM Community!

    On the Dashboard, click on one of the boxes beside the External interface and you will see the flow monitor.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML