Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 4 subscribers
  • Views 13310 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error on HA Node (Hyper-V VM)

P.W.Daniel

Hello,


We are using a Sophos UTM 9.3 HA Cluser on Hyper-V. The cluster worked fine, but after some time we noticed that the 2nd node had shut down. When we power on the virtual machine it boots like normal, but just after that we get the message "blogd: can not set console device to /dev/pts/0: Device or resource busy", and the UTM VM shuts down again.


Does anyone have an idea what causes this, and more importantly, how to fix it?



This thread was automatically locked due to age.
Parents
  • 0
    Anything in the HA log?

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    Anything in the HA log?

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Unfiltered HTML