I just purchased a DLINK DWR-921 for its 4g ability + Antennas. But I have it in Bridge mode so it should act like a 4g modem, it works but the issue im having is on the UTM Interfaces I have a seperate Ethernet interface for this. When I use DHCP mode it gets the right IP address but it doesnt get the right Default Gateway, its always the same as the IP. The only way i can get a connection to work is to manually enter the IP and DG, but its not static its dynamic so as you can imagine i have to change it often. This isnt any use to me unless it can acquire the IP automatically, I know the Dlink works as on a windows PC it either picks up the correct DG or uses 0.0.0.0 as the DG but either way it works fine. So its only when connected to our UTM that it doesnt acquire the correct addresses via DHCP.
Anyone got any ideas as to why this maybe, of course Dlink Support says to contact Sophos but i am using the UTM home licence so this is as much help as i can get.
Why wouldnt my UTM acquire the correct DG off the 4g modem?
Thanks
JK
This thread was automatically locked due to age.
