Management, Networking, Logging and Reporting Client DHCP Option 60

UTM Firewall requires membership for participation - click to join

Thread Info

State Not Answered
Locked Locked
Replies 13 replies
Subscribers 2 subscribers
Views 21491 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Client DHCP Option 60

ontae over 10 years ago

Hi,

i need to set a client dhcp option 60 on a interface. Is this possible?

If yes, how?

Thanks in advance for a response.

Regards, ontae

This thread was automatically locked due to age.

0 alan_smithee over 9 years ago in reply to BAlfson

Putty to
/var/chroot-dhcpc/etc/ you iface file
add the following line
send vendor-class-identifier VALUE IN HEX;

example:
send vendor-class-identifier 49:50:54:56:5f:52:47;
Cancel
Vote Up 0 Vote Down

Cancel
0 pamart over 9 years ago

Hi alan_smithee,

Thank you for the tip, unfortunately when you reboot your appliance, this setting is erased...
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 8 years ago in reply to pamart

What happens if you modify /var/chroot-dhcpc/etc/default.conf and then reboot? The new line should also appear in /var/chroot-dhcpc/etc/eth#.conf.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel