This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need help setting up dual subnet/router

Hi,

Am a bit of a network noob, so need some help.

I am trying to set up the following network:

Firewall:

Nat mascurading:

Static Routing:

I can reach the 192.168.50.51 computer from 192.168.0.5, but not the other way arround.

The 192.168.50.51 computer cannot ping 192.168.0.5 ,192.168.0.1 or the internett

 

What am i missing?



This thread was automatically locked due to age.
Parents
  • Why you didn't rout the 192.168.0.x/24 and 192.168.50.x/24 Networks at the firewall?

    Then both subnets would be "directly connected" to UTM and routing is not a problem.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • Why you didn't rout the 192.168.0.x/24 and 192.168.50.x/24 Networks at the firewall?

    Then both subnets would be "directly connected" to UTM and routing is not a problem.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data