ipv6 mask on WAN side - Can it be less than 64

Hello Daniel,

Normally you don't use  subnetting with IPv6, the provider must send a IPv6 Prefix with a lower network than /64, for example /56 or /48. Then you can use your own network /64 on the internal site with the provider Prefix.

br

Hello Daniel,

Normally you don't use  subnetting with IPv6, the provider must send a IPv6 Prefix with a lower network than /64, for example /56 or /48. Then you can use your own network /64 on the internal site with the provider Prefix.

br

There are several ways to provide IPv6 connectivity. Normally your upstream should give you a documentation.

One common way is to have a transfer net with only 2 nodes, for example 2001:db8:1234::1 for the provider gateway and 2001:db8:1234::2 for you.

In this case a /126 is sufficient, a /124 may do.

However there has to be another assignment called "routed network" (often a /56 or /48) which will be reachable by the customer IP,.

One example of this scenario is Hurricane.

But it doesn't. As written, only a /124 is given. With other operators I have a /48 that I split in two /64 for the UTM, it works like a charm

Well, "may do" doesn't apply in my case. I ask for a second /64 on WAN side and will see. Have to say would be great if UTM would accept higher than /64