This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLAN contra Switch HPE

jofre quinones over 2 years ago

estoy configurando un XG 230 contra un Switch HPE 1920s pero no logro que las vlans se activen

This thread was automatically locked due to age.

Parents

0 Alan Brand over 2 years ago

ejemplo para comware (former 3com, then H3C):

vlan 1
 name primary-VLAN
#
vlan 2
 name auxilliary-VLAN
#
interface GigabitEthernet1/0/1
 port link-mode bridge
 description Trunk-to-UTM
 port link-type trunk
 port trunk permit vlan all
 port trunk pvid vlan 1
#

ejemplo para procurve (former RND, now aruba):

interface 1 
   name Trunk-to-UTM
exit
vlan 1 
   name "primary-VLAN" 
   untagged 1
   exit 
vlan 2 
   name "auxilliary-VLAN" 
   tagged 1
   exit

En ambos casos, agregue una interfaz "Ethernet VLAN" con la etiqueta dada (2 en el caso anterior)

Reply

0 Alan Brand over 2 years ago

ejemplo para comware (former 3com, then H3C):

vlan 1
 name primary-VLAN
#
vlan 2
 name auxilliary-VLAN
#
interface GigabitEthernet1/0/1
 port link-mode bridge
 description Trunk-to-UTM
 port link-type trunk
 port trunk permit vlan all
 port trunk pvid vlan 1
#

ejemplo para procurve (former RND, now aruba):

interface 1 
   name Trunk-to-UTM
exit
vlan 1 
   name "primary-VLAN" 
   untagged 1
   exit 
vlan 2 
   name "auxilliary-VLAN" 
   tagged 1
   exit

En ambos casos, agregue una interfaz "Ethernet VLAN" con la etiqueta dada (2 en el caso anterior)

Children

No Data