Static Routes

Question

Hi all, 
 i have the following Szenario: 
 2 Networks 
 Network 1: 192.168.1.0/24 GW:192.168.1.254 (Sophos UTM) 
 Network 2: 192.168.10.0/24 GW:192.168.10.252 (CISCO on ETH2 Sophos) 
 Sophos ETH2: 192.168.10.1 
 I could reach the devices behind the CISCO but there is also a different Network (10.202....) i cant reach! 
 Static GW Route is set : Network 10.202..... GW:192.168.10.252 Interface: ETH2 
 
 What i made wrong...? 
 Thank you

PhilippRusch · Accepted Answer

Go to your UTM, then to Support/Tools/Ping Check and try to ping a host you know in the 10.202.x.y network. 
 If this works, the routes on the other side are set. 
 If not, you have to check the Cisco's routes, because this is the default gateway for the other side to reach your sophos. 
 If you want to have this working with the 192.168.1.0/24 network as well, you have to tell the cisco about this net, too. 
 Have fun!

PhilippRusch · Answer

Does the route back exist, I mean, is it defined at the cisco?