Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 4 subscribers
  • Views 2379 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Block external IP

Bastiaan van Leeuwen

I want to block an external IP, but it seems the IP still can connect to the firewall. I have created a DNAT rule like below. Still the IP shows up in my packetfilter.log. I have created a network group which i'm using for the blocked IP, and created a network group for al my wan interfaces.

What can i do to block an IP entirely?



This thread was automatically locked due to age.
Parents
  • FormerMember
    +1 FormerMember

    Hi ,

    Thanks for reaching out to the Community! 

    Try to locate the automatic firewall rule created for this DNAT rule, and from the Advanced tab, remove "Log traffic" if it's selected. Or you can create a custom matching firewall rule and select action drop and remove "Log traffic". 

    Reference screenshot: 

    Thanks,

Reply
  • FormerMember
    +1 FormerMember

    Hi ,

    Thanks for reaching out to the Community! 

    Try to locate the automatic firewall rule created for this DNAT rule, and from the Advanced tab, remove "Log traffic" if it's selected. Or you can create a custom matching firewall rule and select action drop and remove "Log traffic". 

    Reference screenshot: 

    Thanks,

Children
Unfiltered HTML