I'm having trouble configuring BGP on our UTM software appliance (9.601-5). I seems that I'm am missing something basic, so I hope someone can push me in the right direction.
Our provider has provided us with information that resulted in the following setup:
- BGP neigbor with ASN and IP adress, no authentication or anything else defined --> works
- Local router ID (under Global) and local AS number -->works
- Subnet to be used as WAN range is bound to local interface that is connected to the CPE.
- Local IP address (same as local router ID) bound to same local interface as virtual IP
With BGP active, I can see that we can connect, BGP summary shows status up and traffic is shown.
However, I cannot connect to any IP address on the WAN range (e.g. ping) of ping from UTM to any external address.
It must be something I am missing. Any help is appreciated. I more information is needed, please let me know.
Best Regards,
Karl-Heinz
This thread was automatically locked due to age.