Mail protection internal mailserver on different port

Hallo,

Please insert a picture of the Edit of the DNAT that didn't work.

Also confirm that the traffic flow is:

     Internet <--- port 25 --> UTM SMTP Proxy <--- port 2525 ---> Mail server

Cheers - Bob

Hi Bob, yes, the flow is as you mentioned. Maybe just the server verification fails, I did not disable it. But it's all about the verification to SMTP 2525 to Exchange, otherwise the recipient filter does not work correctly. I could choose any other port than 25, that's is the problem. Recipient Filter on frontend connectors with Exchange 2013 upwards is working different.

A picture of the Bearbeitung of that rule, please.  Also open "SMTP-Empfang ex.kif.local" so that we can see what that is.

Cheers - Bob

I did a new screenshot and this is the target:

That's close, but you need something like:

     DNAT : Internet IPv4 -> SMTP -> External (Address) :to Exchange with SMTP-Empfang Exchange

2022-03-21 CORRECTION to not bypass the SMTP Proxy: 'DNAT : Internal (Address) -> SMTP -> Exchange : to SMTP-Empfang Exchange' which is what you had originally.  Apparently, recipient validation does not use port 25!

If Exchange also sends outbound mail on 2525, you will also want a rule like:

     SNAT : Exchange -> {port 2525} -> Internet IPv4 : from SMTP

However, if you want outbound mail to be processed by the SMTP Proxy, Exchange must use the UTM as a smart host and you will instead need something like:

     DNAT : Exchange -> {port 2525} -> Internal (Address) : to SMTP

Glück gehabt ?

Cheers - Bob

Hi Bob, not really "Glück". With that incoming rule I bypass the mailprotection completely. From my point of view, traffic should originate from the UTM itself, but I did not manage it with any DNAT rule I tried.

Ah, my mistake, I'll correct my post above.  Apparently, recipient validation does not use port 25!

Cheers - Bob

yes, validation must be performed on SMTP backend connector with Port 2525. I can not change to port 25, this way smtp frontend service would crash on Exchange 2013 and above. I use now mail users instead of mail contatcs, these could be validated by the UTM and AD query. Unfortunately, it still works only with LDAP unencrypted with UTM, not LDAPS

I meant that the SMTP Proxy apparently isn't using port 25 for recipient validation, otherwise, your original DNA should have been adequate.  I assume you also tried 'DNAT : Exchange -> {port 2525} -> Internal (Address) : to SMTP'.

Cheers - Bob

I meant that the SMTP Proxy apparently isn't using port 25 for recipient validation, otherwise, your original DNA should have been adequate.  I assume you also tried 'DNAT : Exchange -> {port 2525} -> Internal (Address) : to SMTP'.

Cheers - Bob