Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 2538 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IMAP UTM

Aktuator

Hi all,

we are using an exchange 2016 on premise and a Sophos UTM 9.707-5.
We want to realize that external clients can connect to their mailboxes via IMAP but not sure how to do that. Do we need to setup WAF for this or is it only possible via port forwarding (DNAT).

Thanks in advance and greetings
Aktuator



This thread was automatically locked due to age.
Parents
  • +1

    Hello,

    WAF = Web Appplication Firewall. This means, only Web-Protocols are supported (Port 80 and 443).

    For IMAP you need tcp port 143 and IMAPS needs tcp port 993.

    You will need a DNAT configuration for this.

    What is your usecase? Do you need to support non-windows clients?

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • +1

    Hello,

    WAF = Web Appplication Firewall. This means, only Web-Protocols are supported (Port 80 and 443).

    For IMAP you need tcp port 143 and IMAPS needs tcp port 993.

    You will need a DNAT configuration for this.

    What is your usecase? Do you need to support non-windows clients?

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML