Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 2792 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Packet shaping for VLANs

gunjan1952

Hi friends,

I want to configure like this:
VLAN 01-10 -------goes through 1st router i.e. (HSO_B1_WiR1)
VLAN 11-20 -------goes through 2nd router i.e. (LTA1GHQA)
VLAN 21-30 -------goes through 3rd router i.e. (LTA1GHQB)

Please help.



This thread was automatically locked due to age.
Parents
  • 0

    Hi Gunjan and welcome to the UTM Community!

    I'm a little confused by your question. Is 10.100.11.0/24 one of the VLANs?  Is 10.100.200.0/24 one of the VLANs?  Where are the three VLANs on your diagram?  Where is masquerading performed and are you double-NATting?  Is the device at 10.100.11.6 also a Sophos UTM?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi Gunjan and welcome to the UTM Community!

    I'm a little confused by your question. Is 10.100.11.0/24 one of the VLANs?  Is 10.100.200.0/24 one of the VLANs?  Where are the three VLANs on your diagram?  Where is masquerading performed and are you double-NATting?  Is the device at 10.100.11.6 also a Sophos UTM?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML