Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 4 replies
  • Subscribers 6 subscribers
  • Views 10491 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can't add a new network interface on UTM 9

Christophe Le Jeune

We set up our UTM 9 on a VMWare VM with 3 network interfaces; when we tried to add a new one, all interfaces (existing and the new one) got disconnected.

We checked our configuration, reboot our UTM, then the whole VM, nothing works.

Last word we heard form support is that it is a "non supported functionnality" (how nicely phrased), as though adding capacity was unusual.

We couldn't get clear instructions on an effective workaround :  do we need to re-install every thing, is there an effective and safe way to do it ?



This thread was automatically locked due to age.
Parents
  • 0

    After 3 days testing, it appears that we had lost the connectivity between the Sophos and the different servers place behind it.

    Downgrading from 9.5 to 9.4 solved the issue. Must be a problem of compatibility between VMware and the 9.5 UTM sw version

  • 0 in reply to Christophe Le Jeune

    Salut, Christophe, and welcome to the UTM Community!

    As rfcat_vk said, your interfaces were probably renumbered.  To correct the order if that happens again:

    # edit /etc/udev/rules.d/70-persistent-net.rules

    After you save the file, restart the UTM so the new order is loaded.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to Christophe Le Jeune

    Salut, Christophe, and welcome to the UTM Community!

    As rfcat_vk said, your interfaces were probably renumbered.  To correct the order if that happens again:

    # edit /etc/udev/rules.d/70-persistent-net.rules

    After you save the file, restart the UTM so the new order is loaded.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • +1 in reply to BAlfson

    As said before, we tried multiple actions with Sophos support, none of which solved our problem.

    The only change that worked was to make a full re-installation with the previous 9.4 version. I can't tell what changed with this 9.4 that solved the problem, but the fact is that it worked.

    Cheers.

Unfiltered HTML