This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.402 Soft-Release

Hi all,

UTM 9.402 has been Soft-Released today and can be found on the FTP server as usual (ftp://ftp.astaro.de/UTM/v9/up2date/u2d-sys-9.401011-402007.tgz.gpg).

Here is the changelog:

News

  • Maintenance Release

Remarks

  • System will be rebooted
  • Connected REDs will perform firmware upgrade
  • Connected Wifi APs will perform firmware upgrade

Bugfixes

  • NUTM-1955 [Access & Identity] 35658: VLAN Interface on top of a bridge disappears from Slave after Reboot
  • NUTM-1958 [Access & Identity] 34242: Communication error with Amazon AWS server
  • NUTM-2129 [Access & Identity] 36050: File Copy from network share over RED50 does not work in one direction
  • NUTM-2234 [Access & Identity] 35592: Backup from 220 to 230 caused eth3 to exist two times
  • NUTM-2449 [Access & Identity] 36228: RED Server sends more peers as peers are configured
  • NUTM-2706 [Access & Identity] Still coredumps from argos after installing the new fix from mantis 35353
  • NUTM-2842 [Access & Identity] 35423: irqd: Support more than 32 cpus
  • NUTM-2844 [Access & Identity] 36028: 82546GB Gigabit Ethernet Controller: Reset adapter / Detected Tx Unit Hang
  • NUTM-2950 [Access & Identity] RED15: fix dnsmasq for transparent/split
  • NUTM-3049 [Access & Identity] 36382: reds-interface does not get IP after re-activating RED device
  • NUTM-3083 [Access & Identity] IPv6 address in log line shortened
  • NUTM-3190 [Access & Identity] IPsec site-to-site: Limit of listening interfaces of 300
  • NUTM-3252 [Access & Identity] High disk I/O during pattern update on smaller UTM appliances
  • NUTM-3522 [Access & Identity] RED15 with static uplink and dns name as utm hostname doesn't work correctly
  • NUTM-3661 [Access & Identity] After deleting red15w mdw crashes
  • NUTM-1371 [Basesystem] 35523: adbs-maintenance.plx - ERROR: canceling autovacuum task - waits for ShareUpdateExclusiveLock/AccessExclusiveLock
  • NUTM-1798 [Basesystem] 35862: Confd doesn't check for valid local time which can lead to dashboard error
  • NUTM-2804 [Basesystem] 36226: Network Utillization on HW LCD doesn't match iftop and webadmin values
  • NUTM-3325 [Email] Bug on Malware scanning UI Text
  • NUTM-3558 [Email] Sandbox result shows up in messages
  • NUTM-3575 [Email] Detailed view defective for Sandstorm pending mails
  • NUTM-3582 [Email] smtpd sometimes gets stuck when creating a cluster
  • NUTM-3620 [Email] Add capabilities to Quarantine manager's spool tab to handle multiple items for the same massage
  • NUTM-2015 [HA/Cluster] Prevent users from changing postgres_secret
  • NUTM-2290 [HA/Cluster] Prevent backup import from changing postgres_secret
  • NUTM-2677 [HA/Cluster] 36293: The Slave node in HA doesn't show any resource usage
  • NUTM-1956 [Network] 35582: flow monitor invents traffic on wlan1 interface
  • NUTM-2236 [Network] 34828: don't start dhclient without interface
  • NUTM-3156 [Network] Slave interface IP where WAF is listen to get lost after a while
  • NUTM-3304 [Network] nic-naming: Provide a fix for delayed 210r2 software support
  • NUTM-3176 [Reporting] In web usage reporting some domains show up as only the suffix
  • NUTM-2779 [WAF] WAF - Slow HTTP error messages do not match the description
  • NUTM-3175 [WebAdmin] It is not possible to select a vlan interface for the "Ping Check"
  • NUTM-3177 [WebAdmin] Sort function in EPP manage computer didn't work correctly
  • NUTM-3184 [WebAdmin] Etc\Greenwich set as timezone causes error on dashboard
  • NUTM-3185 [WebAdmin] Issues while using the "Search Log Files" tab in the "View Log Files" part of webadmin
  • NUTM-3311 [WebAdmin] Remove Support for TLS v1.0 from Apache Configuration
  • NUTM-3109 [Web] Proxy stops working without segfault or hint in the logs
  • NUTM-3114 [Web] ADSSO join didn't work with special characters like \xF6
  • NUTM-3123 [Web] HTTP Log is flooded with "Server delivered only 0 of X bytes" messages
  • NUTM-3124 [Web] HTTP proxy intermittently stuck in 'recv: Input/output error'
  • NUTM-3577 [Web] High CPU Load after update to 9.4
  • NUTM-3076 [WiFi] Split network modes do not work with RED15w
  • NUTM-3418 [WiFi] RED15w forgets its wireless encryption key after reboot
  • NUTM-3188 [[Backend/Devel] Confd] Domain-Regex object deployed from SUM will be created more than once
  • NUTM-3189 [[Backend/Devel] Confd] Auto packetfilter rule is not updated if the destination service object of a NAT will be changed

Regards

/talex



This thread was automatically locked due to age.
Parents
  • Hi,

    when i download the up2date file to the utm, it appears in the updates available section. After a few minutes it disapears.

    I have this behavior on several utms. Anyone else have this problem?

    cheers Andy 

    Cheers Andreas

     

    UTM SCE/SCA | Endpoint SCE

  • I assme you have downloaded it manually to the UTM? Have you applied the up2date because if you don't it will disappear?

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Reply Children
No Data