Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 7 subscribers
  • Views 23915 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM HOME EDITION INSTALL ISSUE NOT WORKING AS IT SHOULD ON VMWARE WORKSTATION

KamranHamid

I have installed The UTM EDITION HOWEVER CAN'T GET THE WEB FILTER OR ANY OF IT FEATURES TO BE WOKKING. I'M USING VMWARE WORKSTATION ON  WITH 4, CPU AND 4 GB RAM AND TWO NICS., THEY ARE BOTH ON BRDIGE MODE TO THE HOST. I HAVE VIRGIN AS THE ISP HAVE TURNED OFF THE VIRGIN ROUTER FIREWALL AND MY ONSITE WINDOW SERVER 2012 R2 FIREWALL. THIS IS FIRST TIME I AM INSTALLING THIS. I TRIED FINDING INFO ONLINE APPRANTLY THERE USE TO BE ISO IMAGE WHICH DOESN'T EXISIT ANY MORE SO SOMEONE HELP ME WITH SETTTING UP THIS ON MY HOME NETWORK WHICH HAS ONE ISP ROUTER PLUS ONE STANDARD CISCO MANAGE SWITCH WITH NO VLAN

MANY THANKS ALL. I HAVE TRIED PLAYING ABOUT WITH IT NOT SO GOOD AT THIS,



This thread was automatically locked due to age.
Parents
  • 0

    Hi, and welcome to the UTM Community!

    Please edit your post to change it into sentence case instead of all uppercase.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    I  have responded on the post Bob ,

    Thank you

  • 0 in reply to KamranHamid

    Can you post a diagram of your network setup? It's not very clear how you have everything connected.

  • 0 in reply to Dlabun

    Hi Thank you for your input,

    I'm new to this stuff but I would give this a go.

    I have a Virgin Super hub2, which is placed into modem mode. this opens one port at the back of the virgin router to be plugged else where. I have plugged this in to my host server which host's VMware workstation where UMT is configured. I have Assigned one nic on my server for the WAN which is this cable coming from the Virgin Super Hub Modem Port. Along with this I have config another nic on my host server as LAN, Which is where a cable is leaving this nic to be connected to my central Switch. Which has no VLAN very basic setup. This is than connecting all devices to network.

    My trouble is i'm not very good with VMWare and virtual stuff. However With in VMware workstation when installing UMT I create two Network Cards and than with in VMware network management I assigned Vnet0 to the WAN nic on the host and Vnet 8 to the LAN nic on the host.  When setuping up UMT having issues with some UPlink where the they are showing but not really working. I have setup the nat masquerade, Also set the UMT as DHCP, Set the DNS, saw a 5 min Youtube video to config. That is all I know so far.

    My confusing bite is, The VMware Network card connecting to the host NIC's Not sure how this should be done and how do I than do it within UMT setup please help.

    Also when you put the Virgin Router in Modem mode it changes the gateway from 192.168.0.1 to 192.168.100.1 would this be a issue. what LAN ip range do I use. at the moment my lan ip range is 192.168.0.X

  • 0 in reply to KamranHamid

    Which version of VMWare are you using? If you are using VMWare Workstation I'd recommend you read the user's manual as it's pretty detailed in setting up network connections.

Reply Children
No Data
Unfiltered HTML