Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 7 subscribers
  • Views 23917 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM HOME EDITION INSTALL ISSUE NOT WORKING AS IT SHOULD ON VMWARE WORKSTATION

KamranHamid

I have installed The UTM EDITION HOWEVER CAN'T GET THE WEB FILTER OR ANY OF IT FEATURES TO BE WOKKING. I'M USING VMWARE WORKSTATION ON  WITH 4, CPU AND 4 GB RAM AND TWO NICS., THEY ARE BOTH ON BRDIGE MODE TO THE HOST. I HAVE VIRGIN AS THE ISP HAVE TURNED OFF THE VIRGIN ROUTER FIREWALL AND MY ONSITE WINDOW SERVER 2012 R2 FIREWALL. THIS IS FIRST TIME I AM INSTALLING THIS. I TRIED FINDING INFO ONLINE APPRANTLY THERE USE TO BE ISO IMAGE WHICH DOESN'T EXISIT ANY MORE SO SOMEONE HELP ME WITH SETTTING UP THIS ON MY HOME NETWORK WHICH HAS ONE ISP ROUTER PLUS ONE STANDARD CISCO MANAGE SWITCH WITH NO VLAN

MANY THANKS ALL. I HAVE TRIED PLAYING ABOUT WITH IT NOT SO GOOD AT THIS,



This thread was automatically locked due to age.
Parents
  • 0

    I have installed the utm edition however can't get the web filter or any of it features to be working. I'm using vmware workstation on with 4, cpu and 4 gb ram and two nics., they are both on bridge mode to the host. I have virgin as the isp have turned off the virgin router firewall and my onsite window server 2012 r2 firewall. This is first time i am installing this. I tried finding info online apparently there used to be iso image which doesn't exist any more so someone help me with setting up this on my home network which has one isp router plus one standard cisco manage switch with no vlan

     

    Please help me to understand what I need to do before install of UTM in terms of network. I have a virgin super hub, with a switch which is plugged into and this is than plugged to all devices etc.

     

    I am using VMware Workstation not sure how the nics should be configured. New this stuff. I have currently assigned two nics on install with bridge mode not sure how the VMware config is done with virtual switch etc.. I can see Wan up and Lan in UMT with ip address but non of the machines on the network are seeings the changes as in I have tested the web protection doesn't work but with UMT test policy it shows blocked as it should. Please advise kindly

     

    Thank you

Reply
  • 0

    I have installed the utm edition however can't get the web filter or any of it features to be working. I'm using vmware workstation on with 4, cpu and 4 gb ram and two nics., they are both on bridge mode to the host. I have virgin as the isp have turned off the virgin router firewall and my onsite window server 2012 r2 firewall. This is first time i am installing this. I tried finding info online apparently there used to be iso image which doesn't exist any more so someone help me with setting up this on my home network which has one isp router plus one standard cisco manage switch with no vlan

     

    Please help me to understand what I need to do before install of UTM in terms of network. I have a virgin super hub, with a switch which is plugged into and this is than plugged to all devices etc.

     

    I am using VMware Workstation not sure how the nics should be configured. New this stuff. I have currently assigned two nics on install with bridge mode not sure how the VMware config is done with virtual switch etc.. I can see Wan up and Lan in UMT with ip address but non of the machines on the network are seeings the changes as in I have tested the web protection doesn't work but with UMT test policy it shows blocked as it should. Please advise kindly

     

    Thank you

Children
No Data
Unfiltered HTML