Thread Info
  • Locked Locked
  • Replies 24 replies
  • Subscribers 18 subscribers
  • Views 36320 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

9.352-6 to Version 9.353-4 on the FTP site

Amodin
News
· Maintenance Update
Remarks
· System will be rebooted
· Configuration will be upgraded
· Connected Wifi APs will perform firmware upgrade
Bugfixes
29945 SPX password notification mails have no header and footer customization
35236 rsync does not sync up2date/pattern packages due to corrupted rsyncd.conf
35300 Interface was deleted through backup restore
35368 HTTP Proxy fails to lookup correct backend group intermittently
35511 Maildrop lock will not removed by pop3proxy
35521 Support Access user cannot be enabled if complex passwords & non-alphanumeric character required
35645 FTP Proxy: frox segfault still occurs after udpate to 9.314
35683 Update kernel to 3.12.48
35704 WAN Failover on RED50 with static IP addresses not successful
35739 SPX Encryption works only if the customer uses "senderspec" as option
35750 SMTP Proxy dies every two hours when using SPX
35755 User Portal: Login not possible - "Authentication system error"
35766 Certificate with Netscape Cert Type: SSL Client not usable for S/MIME encryption
35787 SG1xxW: middleware errors + changing txpower not working
35797 dynamic mac filter changes not working
35799 Corrupted rpmdb - check and repair from 33545 doesn't work
35810 Web Proxy unable to start following update to 9.350
35816 spx-auth dies without any log entry
35923 HTTP Proxy: fix of memory leaks
35928 Windows devices randomly showing up as Linux device=3 in httpproxy with device authentication
35970 Remote access reporting is incorrect
35974 Printable config doesn't show content of WebAdmin user preferences > shortcuts in Confd format
35978 Update ntp to 4.2.8
35979 HTTP Proxy does not provide full certificate chain when using custom cert for enduser pages
35980 Proceed button for a forbidden file extension change the signature of a https request
35985 Executive Report: VPN client 'duration' counted incorrectly if users logged > 1 day
35994 MAC filter list with more than 700 entries doesn't get updated on change
35999 FTP over HTTP: directory listing uses wrong paths
36008 SPX registration mails mess up exim header sporadically
36012 No "Server Hello" is send by WebProxy from the UTM to the client
36013 Installation of first package failed during Up2Date (db_verify?)
36019 IP range objects in allowed relays will not insert in the exim configuration
36065 Webadmin triggers L2TP over IPsec PSK change if "&" is used in PSK
36086 Executive Report: Wrong count of ssh logins in summary
36171 Flow Monitor broken since the XSS patches
36221 After update to version 9.317/9.351 SMTP messages stop being processed (without any notifications/errors in log)




This thread was automatically locked due to age.
  • in reply to gsxfan
    I don't know gsxfan - I think this has been endemic for awhile. I've noticed it before, and I ntice it still in 9.317
    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • After a second glance I have to state that the problems of the faulty 352 are not completely solved. The message window containing "Do you want to wait 30 more seconds to finish the request?" is still a true companion. It seems to pop up after a while when I leave the web UI open in the browser. No matter if flow monitor is open or not, simply staying on the dashboard view.
    And the other one "Do you want to wait another 30s...." pops up too from time after time.

    This is somehow a cosmetic issue, but who can tell if there are other issues under the hood which are not so obvious? My trust in this system dimishes from update to update....
  • in reply to a.vanderveen@crypsys.nl
    Here (home install) the two problems with graphs not displaying and flow monitor are also working again after this update.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • first glance: sg210 with chrome browser: still no flowmonitor and backend issue. with firefox I do have the flowmonitore and no backend issue. Both browser used on xubuntu. For specific details, please send me a msg or case reference.

    ## UPDATE

    I checked with chrome and without cache and all works fine.

  • Seems to be working fine here.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • in reply to CS

    Hi CS,
    this depends on your up2date setting. If your machines syncs update files every 15 minutes it will remove everything which is not known by the up2date servers. So if you upload packages manually, you can either configure a reasonable up2date check interval or configure manual up2date checks for the time being.

    /talex

    - 21 is only half of the truth

  • in reply to SimonSlater
    "Deleted lingering download files: u2d-sys-9.352006-353004.tgz.gpg"

    Manual uploaded patch is automtically removed after a few minutes. Why?

    My up2date log

    2016:01:25-14:23:55 astaro auisys[20550]: unpacking up2date package: /var/up2date/sys/u2d-sys-9.352006-353004.tgz.gpg
    2016:01:25-14:23:55 astaro auisys[20550]: unpacking up2date package version: 9.353004
    2016:01:25-14:23:55 astaro auisys[20550]: Verifying up2date package signature
    2016:01:25-14:23:58 astaro auisys[20550]: Unpacking installation instructions
    2016:01:25-14:23:59 astaro auisys[20550]: parsing installation instructions
    2016:01:25-14:24:00 astaro auisys[20550]: Showdesc ok.
    2016:01:25-14:24:00 astaro auisys[20550]: [INFO-301] New Firmware Up2Date is ready for installation
    2016:01:25-14:24:21 astaro auisys[20550]: Up2Date Package Installer finished, exiting
    2016:01:25-14:24:21 astaro auisys[20550]: id="3716" severity="info" sys="system" sub="up2date" name="Up2Date Package Installer finished, exiting"
    2016:01:25-14:34:02 astaro audld[22732]: no HA system or cluster node
    2016:01:25-14:34:02 astaro audld[22732]: Starting Up2Date Package Downloader
    2016:01:25-14:34:03 astaro audld[22732]: patch up2date possible
    2016:01:25-14:34:14 astaro audld[22732]: id="3701" severity="info" sys="system" sub="up2date" name="Authentication successful"
    2016:01:25-14:34:15 astaro audld[22732]: Deleted lingering download files: u2d-sys-9.352006-353004.tgz.gpg

    This makes it hard to schedule the patch install ;-)

     

    Sophos Certified Architect (UTM + XG)

  • in reply to oliver.kapffer@eswe.com

    I posted the link above

    http://ftp.astaro.com/pub/UTM/v9/up2date/u2d-sys-9.352006-353004.tgz.gpg

    Regards Simon

    UTM - 9.411-3 | Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
    8GB Memory | Samsung EVO 850 120GB SDD | Intel GB Ethernet x3

  • in reply to twister5800
    Thanks Martin,

    i'm new to Sophos UTM and did no realize that the file was on the ftp-site. only saw 9.352 and thought this is Version 9.352, but the filename means 9.352 to 9.353.

    Again thanks for your hint.
  • in reply to oliver.kapffer@eswe.com
    ftp.astaro.com/.../u2d-sys-9.352006-353004.tgz.gpg

    -----

    Best regards
    Martin

    Sophos XGS 2100 @ Home | Sophos v20 Technician

Unfiltered HTML