Unable to update from 9.300-5

RE: Unable to update from 9.300-5

TerminatorTerminator — Mon, 15 Dec 2014 13:00:34 GMT

yes, but i solved the problem now with a fresh installation auf 9.3 with installing the backup config file

RE: Unable to update from 9.300-5

BAlfson — Mon, 15 Dec 2014 12:27:48 GMT

Did you confirm that the /var/up2date/sys directory was empty before downloading the Up2Dates? In any case, I would download the u2d-sys-9.303002-304009.tgz.gpg file again, making sure there isn't already one in /var/up2date/sys.

Cheers - Bob

RE: Unable to update from 9.300-5

TerminatorTerminator — Sun, 14 Dec 2014 23:43:54 GMT

i have tried the same procedure but:

Installing up2date package version 9.304009
  Verifying up2date package signature
  Unpacking installation instructions
  Unpacking up2date package container
  Running pre-installation checks
  Starting up2date package installation
    Testing install package: libaviraglue-9.30-1.g28d2430.rb1.i686.rpm         OK
    Testing install package: libopenssl1_0_0-1.0.1j-1.gddc1804.rb3.i686.rpm    OK
    Testing install package: libopenssl1_0_0_httpproxy-1.0.1j-1.gddc1804.rb3.i686.rpm OK
    Testing install package: libply-splash-core2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
    Testing install package: libply-splash-graphics2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
    Testing install package: libply2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
    Testing install package: cm-nextgen-agent-9.30-19.gf9c7fd4.rb1.i686.rpm    OK
    Testing install package: firmware-wifi-9300-0.181842907.gf5650af.rb3.i586.rpm Failed!
Up2Date package installation failed: An error occured during the RPM pre-installation test (1)
Please review the log file for further information.

what can i do?

RE: Unable to update from 9.300-5

BAlfson — Sat, 13 Dec 2014 10:47:24 GMT

Jon, I'm not sure why you're having a problem. If you're not using High Availability, try, as root, the following.

Confirm that the directory is empty:

cd /var/up2date/sys
ls -l

Download and prepare for installation:

wget ftp.astaro.com/.../u2d-sys-9.300005-301002.tgz.gpg
wget ftp.astaro.com/.../u2d-sys-9.301002-302002.tgz.gpg
wget ftp.astaro.com/.../u2d-sys-9.302002-303002.tgz.gpg
wget ftp.astaro.com/.../u2d-sys-9.303002-304009.tgz.gpg
/sbin/auisys.plx --showdesc

Then install in WebAdmin.

Cheers - Bob

RE: Unable to update from 9.300-5

scorpionking — Fri, 12 Dec 2014 06:33:25 GMT

I don't think that it will be helpfull to update from 9.300 to 3.100... ;-)

How is your automatic update configured?
What does the Up2Date log state?
Have you downloaded all necessary up2date files?