Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 4 subscribers
  • Views 2068 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unable to update from 9.300-5

JonEvans
I only have one update available which will allow me to upgrade from 9.300-5 to 3.100-2 but the system isn't recognizing the update. I have uploaded manually and still no luck. I have checked the file structure and it is going into /var/up2date/sys

When I run the auisys.plx manually it doesn't even look like it checks that folder for an update.

Has anyone else experienced this problem?


This thread was automatically locked due to age.
Parents
  • 0
    i have tried the same procedure but:

    Installing up2date package version 9.304009
      Verifying up2date package signature
      Unpacking installation instructions
      Unpacking up2date package container
      Running pre-installation checks
      Starting up2date package installation
        Testing install package: libaviraglue-9.30-1.g28d2430.rb1.i686.rpm         OK
        Testing install package: libopenssl1_0_0-1.0.1j-1.gddc1804.rb3.i686.rpm    OK
        Testing install package: libopenssl1_0_0_httpproxy-1.0.1j-1.gddc1804.rb3.i686.rpm OK
        Testing install package: libply-splash-core2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
        Testing install package: libply-splash-graphics2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
        Testing install package: libply2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
        Testing install package: cm-nextgen-agent-9.30-19.gf9c7fd4.rb1.i686.rpm    OK
        Testing install package: firmware-wifi-9300-0.181842907.gf5650af.rb3.i586.rpm Failed!
    Up2Date package installation failed: An error occured during the RPM pre-installation test (1)
    Please review the log file for further information.


    what can i do?
Reply
  • 0
    i have tried the same procedure but:

    Installing up2date package version 9.304009
      Verifying up2date package signature
      Unpacking installation instructions
      Unpacking up2date package container
      Running pre-installation checks
      Starting up2date package installation
        Testing install package: libaviraglue-9.30-1.g28d2430.rb1.i686.rpm         OK
        Testing install package: libopenssl1_0_0-1.0.1j-1.gddc1804.rb3.i686.rpm    OK
        Testing install package: libopenssl1_0_0_httpproxy-1.0.1j-1.gddc1804.rb3.i686.rpm OK
        Testing install package: libply-splash-core2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
        Testing install package: libply-splash-graphics2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
        Testing install package: libply2-0.8.8_git201309032142-5.17.1322.g0e019d3.rb1.i686.rpm OK
        Testing install package: cm-nextgen-agent-9.30-19.gf9c7fd4.rb1.i686.rpm    OK
        Testing install package: firmware-wifi-9300-0.181842907.gf5650af.rb3.i586.rpm Failed!
    Up2Date package installation failed: An error occured during the RPM pre-installation test (1)
    Please review the log file for further information.


    what can i do?
Children
No Data
Unfiltered HTML