This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Memory swap usage 9.1GA and UTM220

We have a UTM220 device, upgraded to 9.1 yesterday.

40 devices/users protected.
Network Visibility, POP3 Proxy, RED, Endpoint Protection, WAF and HA are all OFF.
HTTP Proxy web caching is off.
IPS is using only 7980 of 15806 patterns.

75-300 users are recommended by Sophos for this unit type.

However memory swap climbed almost instantly to over 50% of RAM.  I know there has been some discussion on swap usage, but am unsure of the outcome.  CPU looks fine.

Memory.png

Can someone send me a summary of Sophos comments on swap/memory usage as I'd really not like to throw 100-200 users on this device...


This thread was automatically locked due to age.
Parents
  • It is not recommended.  It will cause you to lose your warranty.  If you open the box and then later it breaks, requiring replacement, you will need to buy a new one.  If you need Sophos Support to login to WebAdmin and they see that you have 4GB of RAM, they will refuse to work on your problem.

    That said, you likely can open the box and see what you would need.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • It is not recommended.  It will cause you to lose your warranty.  If you open the box and then later it breaks, requiring replacement, you will need to buy a new one.  If you need Sophos Support to login to WebAdmin and they see that you have 4GB of RAM, they will refuse to work on your problem.

    That said, you likely can open the box and see what you would need.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data