Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 89 replies
  • Subscribers 4 subscribers
  • Views 84222 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Memory swap usage 9.1GA and UTM220

Simon Shaw
We have a UTM220 device, upgraded to 9.1 yesterday.

40 devices/users protected.
Network Visibility, POP3 Proxy, RED, Endpoint Protection, WAF and HA are all OFF.
HTTP Proxy web caching is off.
IPS is using only 7980 of 15806 patterns.

75-300 users are recommended by Sophos for this unit type.

However memory swap climbed almost instantly to over 50% of RAM.  I know there has been some discussion on swap usage, but am unsure of the outcome.  CPU looks fine.

Memory.png

Can someone send me a summary of Sophos comments on swap/memory usage as I'd really not like to throw 100-200 users on this device...


This thread was automatically locked due to age.
Parents
  • 0
    Caprocha, I think you should submit a Support request.  None of my clients on V9.006-5 is having this issue, and all have IPS active.  Prior to 9.006, the only one without a problem was a 100-IP site on an IBM box with 7GB of RAM.

    Please let us know what Support says.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Caprocha, I think you should submit a Support request.  None of my clients on V9.006-5 is having this issue, and all have IPS active.  Prior to 9.006, the only one without a problem was a 100-IP site on an IBM box with 7GB of RAM.

    Please let us know what Support says.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML