Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 4 subscribers
  • Views 16557 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Headless (Serial Console) Installation?

Rogue Agent
Is it possible?  I'm attempting to install on a device which has no video card.  I can see the options over serial once it boots - 

"boot:" prompt and instructions about Enter, F1 and F3.  But after that nothing shows on the serial console.

Is it possible to perform the install this way?


This thread was automatically locked due to age.
Parents
  • 0
    Over $100 with shipping.  More than a USB drive!

    Cheers - Bob

    Sorry for any short responses.  Posted from my iPhone.
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    Hello,
    Similar challenge here. Second hand ASG320 with no video connection. I've already purchased a cable that I thought would work ($25!), but the connector was far to large for the pin grouping on the motherboard.

    My question: is it possible to do a headless installation on an ASG 320 ver1? Would anyone be willing to share a prepared automated ISO I could use? Coffee is on me, but I'm really struggling here [:(]

    Thanks,
    Tim
Reply
  • 0 in reply to BAlfson
    Hello,
    Similar challenge here. Second hand ASG320 with no video connection. I've already purchased a cable that I thought would work ($25!), but the connector was far to large for the pin grouping on the motherboard.

    My question: is it possible to do a headless installation on an ASG 320 ver1? Would anyone be willing to share a prepared automated ISO I could use? Coffee is on me, but I'm really struggling here [:(]

    Thanks,
    Tim
Children
No Data
Unfiltered HTML