Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 8 subscribers
  • Views 2132 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM on a Intel Gen12 platform

greiff

Hey,

is it possible to install UTM on Intel Gen12 platform with DDR5?

Mainboard: Supermicro X13SAE

Best regards

Jonas



This thread was automatically locked due to age.
Parents
  • 0

    Hello ,

    Thank you for reaching out to the community, it should. Opt for 64bit OS while installing. As the minimum requirement are as follows:

    • Processor: Intel Atom Dual Core with 1.46 GHz (or compatible)
    • Memory: 2 GB RAM
    • HDD: 40 GB SATA hard disk drive or SSD
    • CD-ROM Drive (optional): Bootable IDE or SCSI CD-ROM drive
    • NIC: Two or more PCIe 2.0 Ethernet network interface cards
    • NIC (optional): One heart-beat capable PCI Ethernet network interface card. In a high-availability system, the primary and secondary system communicate with one another through so-called heart-beat requests. If you want to set up a high-availability system, both units need to be equipped with heart-beat capable network interface cards.
    • USB (optional): One USB port for communications with a UPS device and one USB port for connecting a Sophos UTM Smart Installer(SUSI)

    Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Technical Support, Global Customer Experience

    Log a Support Case | Sophos Service Guide
    Best Practices – Support Case  | Security Advisories 
    Compare Sophos next-gen Firewall | Fortune Favors the prepared
    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to Vivek Jagad

    The CD-ROM is not necessarily a minimum requirement.  You can use a USB boot loader program such as Rufus to create a bootable drive from ISO on USB, and this has been out there for a long time. But I get it, copy/paste, lol.

    Yes, you can install it and choose the64-bit option on install. 

    Keep in mind that if you do eventually go to XG, the home version is hardware limited to 6GB memory and 4 cores on a single processor.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    Is the UTM now able to boot from an UEFI-only system? Last time I checked BIOS was an requirement.

  • 0 in reply to Alan Brand

    Not to my knowledge.  XG might, but I haven't tried it since v17? or so.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    Hi

    at this stage the XG home (V19.5 EAP) does not support UEFI booting.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply Children
No Data
Unfiltered HTML