This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG 210 Rev 1 specs

Does anyone happen to have the spec sheet for a Rev 1 SG 210?  I'm working on an issue of slow throughput on the revision and believe we might be hitting the upper limit of what it can do.  We have turned off all the extras, but still find slow and laggy Citrix Remote Desktop session when total interface throughput reaches 100 - 150 Mb/s.

There are no interface errors anywhere from that we can see.  CPU hovers around 25% utilization and ram is about 18% consumed out of 8GB.

The only other thought is that there are a lot of rules logging to the HDD.



This thread was automatically locked due to age.
Parents
  • Here's what was in the 2014 Sizing Guide.  Note that the values manufacturers show are always the max that can be obtained by configuring for each measurement.

         

    That device is a Celeron Dual Core @ 2.70Ghz.  I'm not convinced you should be running into this speed problem.  Any luck with #1 or #7 in Rulz?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Here's what was in the 2014 Sizing Guide.  Note that the values manufacturers show are always the max that can be obtained by configuring for each measurement.

         

    That device is a Celeron Dual Core @ 2.70Ghz.  I'm not convinced you should be running into this speed problem.  Any luck with #1 or #7 in Rulz?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data