Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 6 subscribers
  • Views 632 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM under hyper-v - nics switching around?

So Fos

Hi all,

Created a hyper-v VM with 6 nics to restore a backup to that was taken on an SG230.

The restore worked, and nic #1 was our wan link and nic #6 was our only internal interface in use.  All good for the better part of a week.

Today the internal nic stopped passing traffic.  Thinking it was maybe some kind of weird arp thing I rebooted everything in the entire stack - server, utm, switch, no dice

Eventually I tried connecting the other heretofore-unused nics in hyper-v, and once i connected nic #2 things started pinging again.  What the?

Somehow the VM switched this interface from nic #6 to nic #2?  Never encountered anything like that before and have had hyper-v utms running for months in the past...



This thread was automatically locked due to age.
Parents
  • 0

    If you use UTM onto a Hyper-V cluster, you should set fix MAC addresses.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    If you use UTM onto a Hyper-V cluster, you should set fix MAC addresses.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
Unfiltered HTML