This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Migrating SSL VPN clients SG115 to XGS 136

Hi,

probably asked and answered many times, but I find it hard to search here, as all I get is some "tech vids" and ancient locked themes. So my situation:

Customer has SG-115 in production. Now they bought XGS-136. They have:

  • 40+ SSL VPN clients (on laptops + Smartphones) all over the country (remote workers)
  • some 50+ custom NAT rules both way (yes, also SNAT is restricted, ports to outside are opened as needed, not all)
  • 3 LAN segments VLAN Tagged

I can take time to manually configure VLANs and NAT rules, plus all remaining configuration. But VPN clients...ohhh, geez, to go again through those configurations of VPN clients on laptops and most of all, on iPhones and Androids....that was real challenge. Clients are all over the country, many abroad, they are used to do business, and some are stupid as duck in regards of using laptop or smartphone, so I spent more than 2 months to manage to install all of them some year ago. 

Is there any way to reliably migrate SSL VPN clients from SG-115 to XGS-136?



This thread was automatically locked due to age.
Parents
  • I am betting Sophos Support and/or an authorized reseller would have migration tools, which the forum members don't have.  Any access to any migration tool we asked for years ago is null for us.

    And on a side note, they are getting rid of the SSLVPN support and switch both SG/XG to Connect.  I would wait for version 2.2 for bug issues to be fixed.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply
  • I am betting Sophos Support and/or an authorized reseller would have migration tools, which the forum members don't have.  Any access to any migration tool we asked for years ago is null for us.

    And on a side note, they are getting rid of the SSLVPN support and switch both SG/XG to Connect.  I would wait for version 2.2 for bug issues to be fixed.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children
No Data