This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setting Boot order on SG230 UTM9

Hi,

I have to re-image our HA cluster containing two SG230. 
I'm not sure if I have to set the boot order to check the USB ports first for a bootable medium (CD with new Firmware) or if this is the native boot order.

This question includes the USB check for the stick with the configuration backup to reload the last valid configuration afterwards.

If I have to modify the boot order, where is the right place to do this? 

I appreciate your support!

Regards,

Jens



This thread was automatically locked due to age.
Parents
  • usb-boot should be the first in BIOS.

    Use an USB-Stick without boot sector for Config-upload.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • usb-boot should be the first in BIOS.

    Use an USB-Stick without boot sector for Config-upload.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data