This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

komme nicht weiter bei Passwort Eingabe

GERMAN:

Guten Tag
Folgende Hardware:
ZBOX PRO CI329 nano

Intel Celeron N4100 Quad-Core-Prozessor
- Dual DDR4-2400MHz SO-DIMM-Speicher (2x4GB HyperX Impact 2x, 4GB, DDR4-2400, SO-DIMM 260 pin)
- Bis zu 3x Display Support (HDMI 2.0, DisplayPort 1.2, VGA)
- 1x SATA-III 2.5 "HDD / SSD-Schacht (Samsung 860 PRO 256GB, 2.5")
- 1x M.2 2242/2260 Key-M Sockel für SATA SSD
- 4x USB 3.0 (1x Typ-C), 1x serieller RS-232 Port
- 2x Gigabit Ethernet LAN, unterstützt Wake-on-LAN
- IEEE 802.11ac/a/b/g/n WLAN
- Passive Kühlung
- Unterstützt Windows 10 und Ubuntu Linux

Folgende Software-Installer: Firewall OS Software ISO für Intel-Hardware (Version 18.0.5 / SW-18.0.5_MR-5-586) 

Vorgehen. Konnte erfolgreich via USB-Speicher installiert werden.

Nach dem Boot Vorgang kommt die Passwort abfrage, aber die Tastatur reagiert nicht?

Zugriff via IP 172.16.16.16:4444 ist nicht erfolgreich.

Ich vermute die Hardware-Treiber sollten noch installiert werden. wie mache ich das?

-------------------------------------------------------------------

Hi
Hardware:
ZBOX PRO CI329 nano

Intel Celeron N4100 Quad-Core-Prozessor
- Dual DDR4-2400MHz SO-DIMM-Speicher (2x4GB HyperX Impact 2x, 4GB, DDR4-2400, SO-DIMM 260 pin)
- Bis zu 3x Display Support (HDMI 2.0, DisplayPort 1.2, VGA)
- 1x SATA-III 2.5 "HDD / SSD-Schacht (Samsung 860 PRO 256GB, 2.5")
- 1x M.2 2242/2260 Key-M Sockel für SATA SSD
- 4x USB 3.0 (1x Typ-C), 1x serieller RS-232 Port
- 2x Gigabit Ethernet LAN, unterstützt Wake-on-LAN
- IEEE 802.11ac/a/b/g/n WLAN
- Passive Kühlung
- Unterstützt Windows 10 und Ubuntu Linux

Folgende Software-Installer: Firewall OS Software ISO für Intel-Hardware (Version 18.0.5 / SW-18.0.5_MR-5-586) 

Vorgehen. Konnte erfolgreich via USB-Speicher installiert werden.

Nach dem Boot Vorgang kommt die Passwort abfrage, aber die Tastatur reagiert nicht?

Zugriff via IP 172.16.16.16:4444 ist nicht erfolgreich.

Ich vermute die Hardware-Treiber sollten noch installiert werden. wie mache ich das?

-------------------------------------------------------------------

Englisch (Google Translate):

The following software installers: Firewall OS Software ISO for Intel hardware (Version 18.0.5 / SW-18.0.5_MR-5-586)

Action. Could be successfully installed via USB storage device.

After the boot process you will be asked for your password, but the keyboard does not respond?

Access via IP 172.16.16.16:4444 is not successful.

I suspect the hardware drivers should still be installed. how do I do that?



This thread was automatically locked due to age.