Hello,
i'm fighting with my two SG430 nodes. I've shut down the slave and afterwards the master per web console. Then i booted the slave first (Does it matter?) and then the master second.
Now the old slave is master and working. Apparently the second node "hangs" as i only see "Sophos protection" on the display. Also when pushing the four buttons does not change the display. The only led powered on is "Int". The other stay "grey" but where shortly blinking while the device was powered on.
In my Log i see the following information:
2020:10:14-14:05:28 node2 ha_mode[29271]: calling check
2020:10:14-14:05:28 node2 ha_mode[29271]: check: waiting for last ha_mode done
2020:10:14-14:05:28 node2 ha_mode[29271]: check_ha() role=MASTER, status=ACTIVE
2020:10:14-14:05:28 node2 ha_mode[29271]: check done (started at 14:00:14)
2020:10:14-14:05:33 node2 repctl[5291]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1
2020:10:14-14:05:33 node2 repctl[5291]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1
2020:10:14-14:10:48 node2 repctl[5291]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1
2020:10:14-14:10:48 node2 repctl[5291]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1
2020:10:14-14:14:00 node2 ha_daemon[5240]: id="38A0" severity="info" sys="System" sub="ha" seq="M: 141 59.496" name="Reading cluster configuration"
2020:10:14-14:14:02 node2 ha_daemon[5240]: id="38A0" severity="info" sys="System" sub="ha" seq="M: 142 14.695" name="Monitoring interfaces for link beat: eth1 eth0"
2020:10:14-14:20:16 node2 repctl[5291]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1
Does anyone know this problem?
This thread was automatically locked due to age.
